Home > How To > How To Setup Raid 0

How To Setup Raid 0

Contents

Sun Microsystems offers two different volume management applications for use on the Sun Fire V445 server: Solaris Volume Manager software VERITAS Volume Manager software Sun's volume management applications offer the following solved How to partition a hard drive to install a fresh OS without losing data Can't find your answer ? Supported I/O controllers are single and dual fibre-channel network adapters, including the following: PCI Single Fibre-Channel Host Adapter (Sun part number x6799A) PCI Dual Fibre-Channel Network Adapter (Sun part number x6727A) Determine the name of the mirrored volume. http://planetweb20.com/how-to/how-to-setup-raid-0-windows-10.html

crjdriver, Dec 12, 2007 #3 crjdriver Moderator Joined: Jan 2, 2001 Messages: 34,955 One other question; why are you using raid? y dev = /devices/[email protected],4000/[email protected]/[email protected],0 cfgadm: Hardware specific failure: failed to suspend: Resource Information ------------------ ------------------------- /dev/dsk/c1t0d0s0 mounted filesystem "/" /dev/dsk/c1t0d0s6 mounted filesystem "/usr" This warning is issued because these commands attempt RAID is a technology that helps protect against disk and hardware failures. A BLUE message box will then display with the following: "Building the RAID 1 may take a few hours or more to complete.

How To Setup Raid 0

Now, on each system startup, we will get two boot options, one for each disk. To verify that the new disk drive is in the device tree, type: TABLE 6-39 # cfgadm -al Ap_Id Type Receptacle Occupant Condition c0 scsi-bus connected configured unknown c0::dsk/c0t0d0 CD-ROM connected To check the status of a RAID striped volume, type: TABLE 6-15 # raidctl RAID Volume RAID RAID Disk Volume Type Status Disk Status -------------------------------------------------------- c0t1d0 IS OK c0t1d0 OK c0t2d0

Sun Fire V445 Server Administration Guide 819-3741-13 Copyright © 2007, Sun Microsystems, Inc. What happens when one disk fails in RAID 1 When one of the hard drives does fail, we get a "Failed Redundancy" message at the Disk Management console. Wish me luck. Windows 7 Raid 1 Staff Online Now crjdriver Moderator DaveA Trusted Advisor Advertisement Tech Support Guy Home Forums > Software & Hardware > Hardware > Home Forums Forums Quick Links Search Forums Recent Posts Members

Ask ! How To Setup Raid 0 Windows 10 You should use the Solaris OS raidctl(1M) command to configure the volumes. Under a software mirror, each device has its own entry in the virtual device tree, and read-write operations are performed to both virtual devices. https://www.petri.com/forums/forum/other/general-hardware/34150-configure-non-raid-disk-into-raid-1-array-without-losing-data-restoring NOW you get to re-connect the backup HDD and copy all your old data files to the new RAID1 array.

It is software RAID, run by the BIOS and the Windows drivers. How To Setup Raid Windows 10 Note - The logical device names might appear differently on your system, depending on the number and type of add-on disk controllers installed. bartNLJan 10, 2015, 12:30 AM @Paperdoc: Yeah, basically, aling with some other data, it's not really much in size and amount or complexity. Make sure that the BIOS and driver is the latest version, as indicated above.

How To Setup Raid 0 Windows 10

If your real worry is protection against losing your data, read up on how to do a real backup system that provides such protection. view publisher site You would only do this on systems that were already up and running and you wanted to have raid. How To Setup Raid 0 Newer Than: Search this thread only Search this forum only Display results as threads Useful Searches Recent Posts More... How To Setup Raid 1 Windows 10 ok setenv auto-boot?

More like this Supercharge your PC's storage with a RAID setup: Everything you need to know RAID Made Easy Choosing the Right RAID Level for Your NAS Box Video SanDisk crams RAID 0 - Disk Striping Disk striping (RAID 0) is a technique for increasing system throughput by using several disk drives in parallel. solved how to fix system 32 config file which is corrupted, without reinstalling whole windows through PENDRIVE without losing data solved How do I shrink a windows 7 partition without losing Ditto.If you want your system to be proteded from a drive failure so you can just swap to the other drive, use RAID 1. Windows 10 Raid

Under hardware RAID volumes, only one device appears in the device tree. Check your PC or motherboard documentation to find out if your motherboard supports RAID (and if so, which levels), and for specific installation instructions.If your PC doesn't have integrated RAID, you Windows 2000 Professional also has JBOD, 0, and 1. his comment is here Now create the array.

The corresponding disk drive OK-to-Remove indicator is lit. 3. Windows 7 Raid 0 Contact Sun Services if you have removed a disk from a RAID Volume and cannot reuse the drive 3. Sun StorEdge T3, Sun StorEdge 3510, and Sun StorEdge A5x00 storage arrays are all supported by Sun StorEdge Traffic Manager on a Sun Fire V445 server.

In the following procedure, the show-disks command is used to determine the controller path.

By providing this logical volume management layer, the software overcomes the restrictions imposed by physical disk devices. You must Install so that the new Windows Registry files get the right info on all these apps.7. Read operations are satisfied at one location (performs as a single disk). Windows 7 Raid 5 Subscribe ▲ Learn more about PCWorld's Digital Editions    🔎 Home News Reviews How-To Video Business Laptops Tablets Phones Hardware Graphics Cards Input Devices Displays Printers Storage Networking Cameras

The disks are maintained at all times with exactly the same information. Short URL to this thread: https://techguy.org/661377 Log in with Facebook Log in with Twitter Log in with Google Your name or email address: Do you already have an account? RAID 1+0, 0+1, 10: Some adapters combine (referred to as nesting) RAID 0 and RAID 1 to provide both data redundancy and increased disk performance. If a drive fails, replace that drive with a working drive and restore the mirror.

If a RAID 0 volume is disabled (broken), data is lost. solved how to reinstall win7 from HDD to SSD without losing activation key? One logical volume is duplicated on two separate disks. Type the show-volumes command to determine the inactive volume: ok show-volumes 7.

Unselect the device: ok unselect-dev 9. I am using OPK as the pre-install. About Us Contact Us Digital Edition Customer Service Gift Subscription Ad Choices Newsletters Privacy Policy RSS Terms of Service Agreement E-commerce Affiliate Relationships PCWorld CATEGORIES Business Laptops Mobile PC Hardware Printers You need to refer to the following document to perform this procedure: Sun Fire V445 Server Service Manual To View the Status of the SCSI Devices 1.

You will see a message box in RED stating the following: "A member drive contains a valid partition table or boot block. The system returned: (22) Invalid argument The remote host or network may be down. Physical Disk Slot Numbers, Physical Device Names, and Logical Device Names To perform a RAID procedure, you must know the physical or logical device name for the drive that you want Raid Card Setup Without losing Data?

Under hardware disk mirroring, only one device (the master) appears in the device tree. Note there IS a way to do this if you are using an onboard type controller. In a striped arrangement, each block is divided and portions of the data are written to different disks simultaneously. The example indicates that no RAID volume exists.

yes 6. For instructions, see: Performing a Mirrored Disk Hot-Plug Operation For more information about the raidctl utility, see the raidctl(1M) man page. If this is a 'Boot' drive ensure that you can boot to the drive before setting up a RAID. Type ^Y ( Control-Y ) to insert it in the command line.

In addition, some applications might report a disk slot number (0 through 3). Join over 733,556 other people just like you! Caution - The OpenBoot command, activate-volumes, should be run only by a qualified service representative.